Shed-roof model
1. Build the 14-inch-square base from a 12-inch-long piece of 1-by-12 edged with 1-by-2s.
2. Draw and cut two support pieces from 9-inch pieces of 2-by-8.
3. Build the 18-inch-square roof. You'll need two 16-inch-long pieces of 1-by-12, ripped to 8 inches wide, for the roof bottom,
and 1-by-3s for the sides. Leave a 1/8-inch gap for the drainage slot at the lower edges.
4. Center and attach supports along opposite sides of base. Position the roof so the drain slot clears the base.
NextHalf-and-half roof model
- Loading comments...
