How to create a tabletop chevron pattern

Use these step-by-step instructions (and a free download) to design a stunning hallway console

Print our chevron pattern

Thomas J. Story 

Print our chevron pattern

1.  Print our chevron pattern and make enough copies so that the pattern fits across your tabletops (you’ll have multiple pages to tape together). 

Download:  Chevron pattern (PDF)

Full story:  I found it in my garage!

 

Secure your pattern

Secure your pattern

2. With your tables side by side, lay your pattern across the tabletops, securing it with a little painter’s tape on each side.

3. Use pushpins to lightly prick the points of each zigzag (through the paper and into the wood surface).

 

Use painter's tape

Use painter's tape

4. Remove the pins and the paper.

5. Use 2-in. painter’s tape to fill in the 2-in. sections. Make sure the edges are smooth and flat.

 

Get out the paint

Thomas J. Story

Get out the paint

6. Paint the exposed areas with two coats of accent paint, letting it dry between coats.

7. Once completely dry, remove tape. Touch up paint with a small paintbrush.

*To create a precise pattern, follow our directions, but you can achieve a similar look by creating a zigzag pattern with 1- and 2-in. painter’s tape, alternating widths side by side continuously across both tabletops, then taking off the 1-in. tape strips and applying accent paint (two coats) to the exposed space. Painter’s tape comes in several widths (1 in., 1 ½ in., 2 in., etc.), so you can vary your design as you like.

 

Printed from:
http://www.sunset.com/home/weekend-projects/chevron-pattern-how-to-00400000043459/