We’ve all gone wild for those dramatic “living walls” of succulents. Here, grower Robin Stockwell shows you how you can make your own
Julie Chai and Heather Arndt Anderson
1 /8Photo by Thomas J. Story
Plant a living picture
Instead of framing a picture, why not a whole garden? Here, cuttings of assorted succulents knit together to create colorful, textural living tapestries in a DIY planter. Read on for more photos and directions for this DIY succulent wall garden.
2 /8Photo by Thomas J. Story
Buy a preassembled frame
Build the vertical garden frame assembly yourself or purchase one.
Break the small “pups” from succulents you already have growing in your garden (the stems should be at least 1/4 inch long).
Set the cuttings aside in a cool area for a few days to allow their stem ends to dry and callus over. (You’ll want about 60 for a 6- by 12-inch frame.)
4 /8Thomas J. Story
Add soil
Set the frame mesh side up on a flat surface; fill it with moist cactus mix, working the mix through the mesh with your fingers. The mesh and a wood backing holds the soil in place.
5 /8Photo by Thomas J. Story
Plant cuttings
Poke the cuttings’ stem ends through the mesh and into the soil. Leave the frame lying flat in a cool, bright location while plants take root, about 7 to 10 days after planting, then begin watering. Once plants are securely rooted―this takes between 4 and 12 weeks―display your succulent wall planter upright in an area that gets morning or filtered sun. Water as soil approaches dryness, about every 7 to 10 days. To water, remove frame from the wall, lay flat, water lightly, and let soil drain before hanging up again.
6 /8Photo by Thomas J. Story
How to make your own succulent frame
1. For a 1-foot-square frame, cut four 12-inch lengths of 2x2 lumber. Nail the corners together for a frame 2 inches deep.
2. Staple or nail ½-inch hardware wire mesh to one side of the open frame. If desired, add trim on top of the mesh to hide it. (If you’re a skilled woodworker, you can also cut a channel into the wood and slide the mesh into the channel, hiding the mesh's cut edges.)
3. Staple or nail a 1-foot square of plywood onto the open back of the frame. Stockwell uses exterior plywood or 1x12-inch redwood.
7 /8Photo by E. Spencer Toy
All-in-one succulent garden kit
Don't have any succulents growing in your garden? Buy a kit that includes a frame assembly, cactus mix, and succulent cuttings (from $65 for 6 by 12 inches; sgplants.comor 831/632-0482).
Completed succulent “paintings” are also available (from $95 for 6 by 12 inches).