Driftwood coatrack

Turn a scavenged piece of driftwood into an organic-chic entryway rack in 30 minutes or less. (For regulations on collecting driftwood, check with your local state beach authority.)

1. Our piece of driftwood happened to lie flat against the wall; if yours doesn’t, use a band saw to cut off one-third of the driftwood lengthwise.

2. With four round hook screws (available at home improvement stores) and a handheld electric drill, drill four holes into the bottom of your driftwood, angling them forward slightly so the hooks won’t lean against the wall. Use a drill bit the width of your screw’s shank.

3. With the help of a wrench, screw the hook ends into the wood, tightening them so they all face forward.

4. Secure your driftwood to a wall using two long screws, spaced so each is secured in a wall stud.