Aloha Shirt Ornaments

Warm up your tree with Hawaiian-inspired origami

Aloha Shirts

Aloha Shirts

Thomas J. Story

For the look of floral-motif aloha shirts, we used origami paper printed with small designs (available at many art supply stores). You could also use wrapping paper or art paper. The hangers are ornament hooks.

Time: About 10 minutes each, plus drying time for glue

Cost: $12 for 12 ornaments

Tools and materials

Scissors

Patterned origami paper (an 18- by 18-inch sheet is enough to make 12 ornaments)

Pencil

One sheet of white paper

Solid-color origami paper (two 6- by 6-inch pieces for 12 ornaments)

Glue stick

Wire ornament hooks

Transparent tape

 

 

Directions

1. Cut a piece of patterned origami paper 7 1/2 inches long and 4 1/2 inches wide; fold it in half.

2. Make a shirt pattern by drawing one onto white paper, sized to the cut origami paper. Cut out the pattern.

3. Place the pattern on the origami paper with the shirt bottom on the fold; cut it out. Also cut out two small rectangular pieces from the solid-color origami paper, each 1 1/4 inches long by 1 inch wide, for the inside front and back. An option is to cut one rectangle from the patterned paper.

4. For the collar, glue the back of a rectangle to the inside top of the shirt front; trim off overlap to follow the lines of the shoulder.

5. Unbend the small loop of a wire ornament hook; center it on the inside of the back of the shirt at the top, with the hook and a bit of stem protruding. Tape it into place. Back sides together, glue the other small rectangle to the inside back of the shirt, covering the tape. Trim overlap.

6. Make a 1-inch cut down the shirt front. Bend back both corners to mimic a collar and glue down.

7. Glue the insides of the shirt together; allow glue to dry (about 10 minutes).

Printed from:
http://www.sunset.com/home/weekend-projects/aloha-shirt-ornaments-00400000013519/