A fire-safe home remodel

After a Southern California family lost their home to wildfire, they made sure its successor was designed to survive the flames|Miranda Jones

More about fire-smart remodeling

4 WAYS TO MAKE YOUR HOUSE MORE FIRE-SAFE

Skip the wooden shutters 

Huge folding doors made of perforated metal panels keep the bedroom areas private but cool; they let breezes through, but won’t be ignited by wind-carried embers. Bonus: Similar panels serve as awnings—they tilt up, like garage doors—for the living room’s glass walls.

Be ready to use the pool

A gasoline-powered fire hose (off the grid, it works even when electricity is lost) lets firefighters make use of the 21,000 gallons of water that the pool holds. (That’s about the amount needed to save a 2,000-square-foot home.) If you don’t have a swimming pool, you could install a cistern or rain barrels.

Reinforce the walls

Instead of the usual gypsum or wood-composite wall­board, the designers specified corrugated concrete board, which is often used in kilns; it’s both noncombustible and heat-resistant. Bonus: Besides protecting the house from fire, it limits heat gain during hot summer months.

Don’t forget the glass itself 

The home’s signature glass walls are made of laminated glass, which is much stronger and more fire-resistant than even double-paned. It’s also more expensive, though. If you can’t afford to replace all the glass in your house, use it on the windward side, which is most likely to face oncoming flames.

Design: Daly Genik Architects, Santa Monica (310/656-3180)

More: Create a landscape that fights fire 

Printed from:
http://www.sunset.com/home/architecture-design/fire-safe-house-00418000069237/