Watch how a prefab house is assembled, step-by-step―from the foundation to the final details
Written bySamantha SchoechMay 27, 2009
Share this story
Aaron Jones
1 of 6Aaron Jones
Week 1
After three frustrating months spent getting permits and finding a contractor willing to take on the job, Jones is finally able to pour the concrete foundation.
A few days after the slab is poured, the house arrives on a flatbed, and Jones rents a forklift to unload the components. The frame goes up in four days.
Thomas J. Story
3 of 6Thomas J. Story
Weeks 2–8
The windows go in. The copper-colored siding goes up ― very slowly. "The siding was probably the biggest problem in the whole process," Jones says. Most subcontractors weren't familiar with it and balked at the idea.
Thomas J. Story
4 of 6Thomas J. Story
Weeks 4–10
For most of the interior finishes, Jones strays from Romero’s specifications, instead installing Ikea cabinets and epoxy floors, and pouring his own concrete countertop (left). He also designs and fabricates a barn-style sliding-glass door for the bathroom.
Thomas J. Story
5 of 6Thomas J. Story
Weeks 10–11
The final touches ― including ductless air-conditioners and a sliding-door mechanism Jones made using an old alternator pulley (left) ― are installed.
Thomas J. Story, styling by Miranda Jones
6 of 6Thomas J. Story, styling by Miranda Jones
Week 12
It’s done. Total cost: about $150 per square foot.
Would he do it again? "It was kind of painful, but it could have been just as painful to build conventionally," says Jones. "I’m really happy with how it came out."